- Quick-action safety retention collar for simple and fast changes to suit the indication
- Long-lasting stainless steel case with 65% higher material hardness (twice as resistant to deformation as titanium)
- Optimised head design without unnecessary corners and edges for easy maintenance and reliable hygiene
- Maximum reliability thanks to top KaVo quality with a 2-year warranty
- Thermo-disinfectable and sterilisable up to 135 °C
14 interchangeable heads for a large number of indications.
Unlimited versatility for KaVo MASTERmatic contra-angle handpieces and their predecessors: 14 different KaVo INTRA heads are available for practically all relevant indications – from classic restorations to prophylaxis, endodontics, surgery and much more.
This ensures lower overall costs while offering a wide range of combination options. Thanks to the KaVo quick-action safety retention collar, the heads can be simply and quickly removed from the shank and exchanged depending on the indication.
KaVo INTRA heads – limitless versatility
- Limitless versatility
KaVo INTRA heads are available for virtually all indications: for classical restorations, prophylaxis, endodontics, surgery and much more. - Highly flexible
KaVo INTRA heads fit all KaVo MASTERmatic and older LN/LH/CN/CH shanks. Thanks to the KaVo quick-action safety retention collar, the heads can be simply and quickly removed from the shank and exchanged. - Highly ergonomic
The particularly small heads offer an optimum view of the workspace. - Simply safe
All heads can be sterilised at up to 135 °C and heat-disinfected. - Maximum efficiency
In daily use, the KaVo INTRA LUX heads are time-saving, durable, flexible, and economical. Thus, no unnecessary investments for inflexible complete instruments are required. After several years of use, the head should be replaced whereas the contra-angle handpiece can still be used. Do you need a new dental instrument for a new application? No problem – again, all you have to do is to invest in a new head.
Heads for Restoration/Standard preparation
Ideal in conjunction with KaVo MASTERmatic M20 L & M07 L.
INTRA head L68
- Transmission ratio 1:1
- For contra-angle burs
- With push-button tensioning, debris deflector disc, and reinforced chuck system
- Removing carious material; preparation of the cavity floor; rotating preparation of root canals, e.g. with NiTi files
- Ideal for endodontic uses in conjunction with KaVo MASTERmatic M20 L and ESTETICA E80/E70/E50 featuring the endodontics function
- Max. operating speed 40,000 RPM
- Mat. no. 1.008.1833
INTRA head L68 B
- Transmission ratio 1:1
- For contra-angle burs and root canal instruments
- Ball-bearing mounted push-button chuck
- Removing carious material; preparation of the cavity floor; rotating preparation of root canals, e.g. with NiTi files
- Ideal for endodontic uses in conjunction with KaVo MASTERmatic M20 L and KaVo ESTETICA E80/E70/E50 featuring the endodontics function
- Operating speed 100 - 40,000 rpm
- Mat. no. 1.008.1834
INTRA head L66 B
- Reduction ratio 3:1
- For contra-angle burs and root canal instruments
- Ball-bearing mounted push-button chuck
- Removing carious material; preparation of the cavity floor; rotating preparation of root canals, e.g. with NiTi files
- Ideal for endodontic uses in conjunction with KaVo MASTERmatic M20 L and ESTETICA E80/E70/E50 featuring the endodontics function
- Operating speed 35 – 13,300 rpm
- Mat. no. 1.008.1831
INTRA head L67
- Reduction ratio 2:1
- For contra-angle burs
- With pushbutton tensioning, debris deflector disc and reinforced chuck system
- Increased low-down pull compared to L68
- Removal of carious material; preparation of the cavity floor
- For root canal instruments, Ø 2,35 mm
- Max. operating speed 20,000 RPM
- Mat. no. 1.008.1832
INTRA Mini head L52
- Transmission ratio 1:1
- Ideal for miniature contra-angle bur (16 mm), Ø 2,35 mm
- With pushbutton tensioning
- With push-button chuck
- For the best viewing conditions when removing carious material, ideal for treatment in confined spaces or pediatric treatment
- Max. operating speed 40,000 RPM
- Mat. no. 1.008.1825
INTRA head L80
- Transmission ratio 1:1
- For turbine drills with 1.6 mm diameter
- With pushbutton chuck
- Finishing and forming chewing surfaces after hardening of the filling material; large and effective pre-polishing; also ideal for caries excavation with FG hard metal drills
- Max. speed 40,000 RPM
- Mat. no. 1.004.4456
Heads for Prophylaxis.
Ideal in conjunction with KaVo MASTERmatic M07 L.
INTRA prophy head L31
- Reduction ratio 2:1
- With thread and knob for snap-on and screw-type polishing attachments (cups, rubber disks and brushes)
- With multiple sealing to prevent the penetration of polishing paste and the associated wear as best as possible
- Remove plaque, polish fillings and smooth the tooth surface, e.g. after powder jet treatment or calculus removal
- Maximal operating speed 7,500 rpm
- Mat. no. 1.008.1824
INTRA prophy head L53
- Reduction ratio 2:1
- Reciprocating rotary motion of 60° prevents the polishing paste from being scattered
- For root canal instruments and polishing attachments with a shaft diameter of 2.35 mm
- With push-button chuck
- Remove plaque, polish fillings and smooth the tooth surface, e.g. after powder jet treatment or calculus removal
- Max. operating speed 3,000 rpm
- Recommended shank: M29 L
- Mat. no. 1.008.1826
INTRA EVA head L61 G
- Damped 0.8-mm stroke for tissue- preserving and pleasant treatment
- Files can be rotated freely (Proxoshape, Bevelshape, Cavishape, and Rootshape files made by INTENSIV)
- For perfect removal of excess filling material and working restored proximal surfaces (with Proxoshape files); for quick and controlled, unilateral or bilateral interdental exposure, enamel reduction and polishing in orthodontics (stripping) (with Ortho Strips); for bevelling anterior tooth composites, composite slots, inlays and onlays (with Bevelshape files); For finishing borders of veneer preparations (with Bevelshape files);For crown preparations when finishing chamfers and bevelling the shoulder preparation (with Bevelshape files); For removing enamel lamellae and for finishing cavity walls (with Cavishape files)
- Maximum drive speed 20,000 rpm
- Mat. no. 1.008.1828
INTRA EVA head L61 R
- Damped 0.8-mm lift, for gentle and efficient treatment and preparation
- Precise locking of the dental instrument into one of 36 snap-in positions (for use with Proxoshape, MarginShaper, Bevelshape, Cavishape, Rootshape files, as well as Ortho Strips from INTENSIV)
- For perfect removal of excess filling material and working restored proximal surfaces (with Proxoshape files); for quick and controlled, unilateral or bilateral interdental exposure, enamel reduction and polishing in orthodontics (stripping) (with Ortho Strips); for bevelling anterior tooth composites, composite slots, inlays and onlays (with Bevelshape files); For finishing borders of veneer preparations (with Bevelshape files);For crown preparations when finishing chamfers and bevelling the shoulder preparation (with Bevelshape files); For removing enamel lamellae and for finishing cavity walls (with Cavishape files)
- Maximum drive speed 20,000 rpm
- Mat. no. 1.008.1829
Heads for Surgery.
Ideal in conjunction with KaVo MASTERmatic M20 L.
INTRA micro head L22
- Transmission ratio 1:1
- With round drill size 2
- Also fits KaVo round drill size 0 or U-inverted cone burs Size 2 and 0
- Microhead with extremely small dimensions for microsurgical procedures such as apicectomies (through bone window)
- Maximum operating speed 20,000 rpm
- Mat. no. 1.008.1835
Heads for Endodontics.
Ideal in conjunction with KaVo MASTERmatic M29 L & M20 L.
INTRA endo/prophy head L53
- Reduction ratio 2:1
- Reciprocating rotary motion of 60° prevents the polishing paste from being scattered
- For root canal instruments and polishing attachments with a shaft diameter of 2.35 mm
- With push-button chuck
- Preparation of root canals
- Max. operating speed 3,000 rpm
- Recommended shank: M29 L
- Mat. no. 1.008.1826
INTRA LUX endo head L3
- Alternating rotating movement of 60° to avoid fracture
- For root canal handpieces with a gripping diameter of 3.5 mm to 4 mm
- With push-button tensioning
- Preparation of root canals
- Maximum operating speed 3,000 rpm
- Recommended shank: M29 L
- Mat. no. 1.008.1822
INTRA endo head L3 Y
- Up and down stroke of 0.4 mm
- Force-absorbing adjustment to the torsional force resistance thanks to the radial, free rotatability of 360°
- For root canal instruments with a grip diameter of 3.5 mm to 4 mm
- With push-button chuck
- Preparation of root canals, lift motion ideal for use with Hedström files
- Maximum operating speed 3,000 rpm
- Recommended shank: M29 L
- Mat. no. 1.008.1823
INTRA head L62
- Reduction ratio 10:1
- For root canal fillers and contra-angle burs with a shaft diameter of 2.35 mm
- With push-button chuck
- Preparation of root canals, lift motion ideal for use with Hedström files
- Maximum drive speed 20,000 rpm
- Mat. no. 1.008.1830
INTRA head L68 B
- Transmission ratio 1:1
- Ball-bearing mounted push-button chuck
- For root canal instruments with 2.35 mm shaft diameter
- Removing carious material; preparation of the cavity floor; rotating preparation of root canals, e.g. with NiTi files
- Ideal for endodontic uses in conjunction with KaVo GENTLEpower 20 LP and KaVo ESTETICA E80/E70/E50 featuring the endodontics function
- Operating speed 100 - 40,000 rpm
- Mat. no. 1.008.1834
INTRA head L66 B
- Reduction ratio 3:1
- Ball-bearing mounted push-button chuck
- For root canal instruments with 2.35 mm shaft diameter
- Removing carious material; preparation of the cavity floor; rotating preparation of root canals, e.g. with NiTi files
- Ideal for endodontic uses in conjunction with KaVo GENTLEpower 20 LP and ESTETICA E80/E70/E50 featuring the endodontics function
- Operating speed 35 – 13,300 rpm
- Mat. no. 1.008.1831
