- Easy selection: three distinct options to choose, to fit your treatment needs.
- Easy to use: the intuitive user interface guarantees easy and comfortable operation.
- Easy speed control: constant speed and constant torque, for precise preparations.
- Easily adjustable speed on the control system display for a wide range of indications.
- Easy and fast installation: the plug-and- play-system connects to a standard air tubing and adjusts automatically to the air pressure of the dental unit.
Easy to use – the easy air to electric motor conversion kit for dental units.
Switching to KaVo electrics helps you to improve your efficiency, provide better patient care, and increase your confidence in handling complicated cases. KaVo will get you there, with the reliability of more than 35 years' experience in electrics. Easy speed and power control – Easy to use – Easy versatility – Easy and fast installation.
ELECTROmatic System
Air to electric motor conversion kit for dental units.
KaVo electric systems combine state of the art handpieces, a short, light-weight motor and the ELECTROmatic™ control system to provide an optimal electric solution for your practice. Three distinct options in the ELECTROmatic series offers the versatility to choose the right system to fit your treatment needs.
Overview
The ultimate all-in-one device for intuitive operation and integrated endo function.
Perfect control and programmable speed settings allow the stable running of the bur. The colour LCD Display shows the actual motor speed and the three speed programs are easy to set-up. Available with one or two motors for easy switch between high-speed and low-speed applications. The pre-programmed file systems make it easy to plan and customize your endodontic sequence.
Features
- All-in-one device with special prep mode and endo mode with torque limit control
- Up to 5 speed memory presets available in prep mode
- Powerful KL703 LED Motor with ISO 3964 coupling pairs perfectly with KaVo MASTERmatic attachments
- Dual motor option for easy switch between high- and low-speed functions
- SMARTdrive™ sensorless control allows a high torque at low speed ranges
- Easy to adjust speed with a slider on display
- Endo workflows with each up to 10 files - Preset Endo file systems
- Large 4.3" TFT color touch screen display
- Intuitive programming adjustment
- Scratch-resistant Dragontrail® glass display, which is six times harder than standard glass
- Smooth surface and easy to clean
- System displays bur speed when selected gear ratio of handpiece is set
- Remote mount display for best ergonomic viewing positions
The perfect solution for all high- and low-speed applications.
Perfect control and programmable speed settings allow the stable running of the bur. The colour LCD Display shows the actual motor speed and the three speed programs are easy to set-up. This allows a fast set-up for all high-speed and low-speed applications.
Features
- LCD-Color Display with 3 speed programs for fast switch between speed settings
- Powerful KL703 LED Motor with ISO 3964 coupling, pairs perfectly with MASTERmatic or EXPERTmatic attachments
- Perfect balance of the system due to the light-weight motor and tube
- SMARTdrive sensorless control allows a high torque at low speed ranges
- Right/left rotation
- Easy to upgrade with the modular system design - motor tubes, LED-bulb, motor itself can be exchanged in the field
- Easy program and change of individual speed settings and forward / reverse option
- Remote mount display for best ergonomic viewing position
Highest power and constant speed at high load.
The entry into the world of KaVo ELECTROmatic of dental electric motors. This simple system allows speed control with the foot control, just as an air-driven high-speed. The KaVo portfolio of speed increasing and decreasing handpieces offers additional control and flexibility of the system.
Features
- Constant torque and constant speed at high load
- Perfect balance of the system due to the light weight motor and tube
- SMARTdrive sensorless control allows a high torque
- Dynamic speed regulation allows consistent bur speed even with variable incoming air pressure
- Pairs perfectly with KL703 LED Motor (100-40,000 rpm) or COMFORTdrive option (30,000-200,000 rpm)
- Easy and flexible installation with mounting brackets included Integrated water filter
- Easy to upgrade with the modular system design - motor tubes and LED-bulb can be exchanged in the field
Features
Mount the ELECTROmatic, then connect the turbine tube, the motor tube to the motor and connect the transformer to mains. With the first push of the foot pedal of the treatment unit, the system gets automatically set-up to the existing air pressure. System is optionally available with long tube for rear delivery set-up of the controller, e.g. onto a cabinet.
Ergonomic & Installation Options: The ELECTROmatic Series can be installed in many positions to reach highest flexibility and perfect ergonomics for the dentist. All necessary fixtures allow assembly under, beside, on top of, behind the tray or onto a wall or cabinet. The display can easily be installed remotely with the integrated cord. The control box will be installed hidden under the tray.
Easy speed control
The ELECTROmatic motor system delivers constant speed and constant torque, allowing precise preparations at the defined speed. Easily adjust the speed on the control system display for a wide range of indications.
Easy to Use
ELECTROmatic Premium features an intuitive user interface. Its simple design and clear picture indications make the systems functionality easy to operate.
Prep mode
Within the prep mode it is very easy to change settings:
- 5 programmable speed settings
- Selectable gear ratio of handpiece — shows actual bur speed
- Motor forward / reverse
Easy-to-Use Endo functionlity
ELECTROmatic Premium features both a prep mode and a special endo mode. The endo mode allows up to 5 individual endo sequences, with up to 10 files each. The system offers a pre-programmed file database including over 20 endo file systems all with preset parameters like diameter, taper and ISO color mode.
Endo workflow setup
Define up to five individual endo workflows. For each workflow choose between one of the predefined endo steps E0-E9. Choose the preferred file system and desired diameter / taper — the system automatically shows the max. speed and torque for the selected ISO file. Define each of the 5 workflows with your desired description.
The endo mode allows up to 5 individual endo workflows, with up to 10 files each. The system offers a database including over 20 endo file systems all with preset parameters like diameter, taper and ISO colour code. Intuitively program your choice of single files from different systems to individualise your workflows and to implement further files.
Work easily in your endo workflow
On the touch display, select one of your five endo workflows. Start with endo step E0 and continue as preset. The display shows the file name with ISO colour code, taper and diameter. If necessary, change the desired speed and torque with the active slider.
- Water is automatically blocked in endo mode
- Gear ratio options 1:1, 3:1 and 8:1
- Torque control; auto reverse; auto reverse / forward
- Motor forward / reverse
